Fasteners T10

The T10 series are in two categories:
-T10H,fasteners to be installed with a hammer tool.
-T10,fasteners to be installed with a levermatic fixing tool.
These two series differ by the opening angle of the fastener.Both fasteners can be made in carbon steel or stainless steel.

Product Features

Twin staple fastener.
Good for deep troughed belts whose troughing angle is 45°
Complete range:for the belt thickness from 7.5 to 16mm
The "staggered" arrangement of the staples enables a splice with a high tensile and dynamic strength to be installed.The loads are spread across the "staggered" staple arrangement
The front edge of the fastener is chamfered which decreases the impact on idlers and belt cleaners.
Easy installation of the fasteners is achieved by the hammer tool (T10H) or by the levermatic fixing tool(T10).
Applications:Under ground and surface coal mining

T10 Technical Parameter

T10H Technical Parameter

Packaging

10 strips of 200mm fastener in each box for 1 meter's joint.

Installation Requirement

The fastener requires either a Hammer Tool(T10H) or Levermatic fixing tool(T10) for installation,specific installation instructions are available on request.